******************************* * THE SHROPSHIRE COLLECTION * * Body text typefaces for * * TIMEWORKS DTP or GDOS * * Screen and Printer * * for the ATARI ST or STE * ******************************* The fonts on this disc have been selected, edited and collated primarily to be used with one exception [SYMBOLS] as body text typefaces and include printer fonts at 180,300 and 360 dpi for 24 pin Dot Matrix, Laser/DeskJet, and Bubble Jet Printers. The screen fonts are 80x80, 80x40, 90x90 and 90x45dpi., for Time- works DTP high resolution (80x80), medium resolution (80x40), GEM/GDOS use high resolution (90x90) and medium resolution (90x45). As the collator of these fonts I claim no credit for the design or excellence of the typefaces, the credit belongs to the authors and in many cases to Alphatype CRS Digital Typesetter. My only claim to fame is the time and work of collecting the typefaces and for editing them, sometimes from odd resolutions and then presenting them to ST users as a public domain offering. The font files are compressed with the exception of some 8 and 10 point files which cannot be compressed. Editing was via Jeremy Hughes Fontkit Plus program and have been extracted from various Public Domain discs. They have then been edited and in most cases scaled to provide four point sizes. (8, 10, 12 and 14). ++++++++++++++++++++++++++++++++++++++++++ + Fontkit Plus 3, GFU programs and + + ST Applications back numbers + + can be purchased from The ST Club + + 2, Broadway Nottingham NG1 1PS. + + Tel: (0602) 410241 Fax: (0602) 241515 + ++++++++++++++++++++++++++++++++++++++++++ The fonts must be expanded before use this is achieved by using the program in the GFU folder included on this disc. The medium resolution fonts may look distorted especially the smaller point sizes when displayed on the screen because of the lack of definition, but will print out OK. The files have not received the same attention as the printer and high resolution fonts but are included to cater for ST users who do not possess a high resolution screen. The Identification numbers (ID's) of the fonts have been set below 127 and so meet the criteria of TIMEWORKS DTP version 1.12 which expects ID's to be numbered less than 127. The ID's have been chosen so as not to duplicate the fonts provided in the TIMEWORKS package. TIMEWORKS version 1.12 requires the font files to be added to the assign.sys file in ascending order of ID number but, Publisher 2 is less demanding in this respect so fonts can be added to the assign.sys file in any order. The font naming convention follows that recommended by Fontkit and David Smith's book "A Users' Guide to TIMEWORKS Desktop Publisher" available from the ST Club. i.e. xxyyyyzz.FNT xx = the screen or printer resolutions H2 = 80X80 high resolution screen [TIMEWORKS] L2 = 300x300dpi printer M2 = 80x40 medium resolution screen [TIMEWORKS] H3 = 90x90 high resolution screen M3 = 90x45 medium resolution screen Q1 = 180x180dpi 24 pin dot matrix printer Q2 = 360x360dpi bubble jet printer yyyy = an abbreviated name of the typeface zz = the point size FNT = the extender The fonts must be loaded into the GEMSYS folder of TIMEWORKS programs where the screen fonts are 80x80 or 80x45 dpi although I have successfully used them at 90x90 and then the font file name to be added to the assign.sys file. When loading into Publisher 2 it is not necessary to follow the GEM\3 naming convention as Publisher 2 will recognise FNT as a legal extender. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ REMEMBER: AFTER LOADING THE FONTS INTO TIMEWORKS DTP OR PUBLISHER 2 GEMSYS FOLDER AND ADDING THE FONT FILE NAMES TO THE ASSIGN.SYS FILE TO RESET THE COMPUTER AND RUN FONTWID.PRG. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are some useful articles in ST Applications June issue No. 18 relating to adding fonts to TIMEWORKS Publisher 2. TYPEFACES AND DESCRIPTIONS: Serif Typefaces: ATHENS ID 125 A thin line serif of even width characters, single stroke straight arm with horizontal opening. LUBALIN GRAPH ID 24 A square serif old style single stroke straight arm vertical opening. UNIVERSITY ROMAN ID 98 A thin line serif old style of low contrast with diagonal stress. Sans Serif: CHICAGO ID 127 A Macintosh screen font (will need the ID number changed to a number less than 126 for use with TIMEWORKS DTP version 1.12) Square normal end monospaced single stroke straight arm horizontal opening. EUROSTYLE ID 122 square normal end of even width single stroke straight arm horizontal opening. FUTURA ID 98 square normal end of old style single stroke straight arm vertical opening. OLYMPIA ID 109 square normal end of even width single stroke straight arm horizontal opening. I hope you enjoy working with the typefaces. Happy ST'ing. G.J.Doodson Telford. August 1992